Quote Originally Posted by MJZiggy
1/32?
I think you would be ok going the diameter of your finishing nail. You want to secure your trim to your studs...There isn't going to be much holding power between the nail and the metal frame...the nail has to go into the stud. Drilling slightly under might make it harder to nail into. Gluing is ok...if you don't want to have to drill through the frame. The problem is you will have to clamp it while the glue sets up. And if you have to tear the trim off you will end up tearing at the wall. I can see it working if you stick to glueing to the steel frame...otherwise drill and nail.