I told you this was coming

[MJZiggy]

Here we go again!

Does anyone know how to nail trim onto a metal doorframe? I'm not really interested in trashing either the door or the trim doing this. By the way, my dad gave me a really cool method for cutting the trim if anyone is interested.

Also, I still haven't gotten a response from the guy at the window place. Useless trash!!!

[billy_oliver880]

Re: I told you this was coming

Here we go again!

Does anyone know how to nail trim onto a metal doorframe? I'm not really interested in trashing either the door or the trim doing this. By the way, my dad gave me a really cool method for cutting the trim if anyone is interested.

Also, I still haven't gotten a response from the guy at the window place. Useless trash!!!

You want to nail trim onto a metal doorframe....Paint me a better picture. What kind of trim and is the rough opening around the door frame wood or not?

[billy_oliver880]

It is quite possible for you to drill pilot holes through the steel frame and match holes with the trim and use self tapping metal screws. That should do the trick.

[MJZiggy]

The door's been installed, and the 2x4 in the opening is covered by the metal door frame 1 3/4 inches. There is a light switch near the door which tells me that there is another stud but it's at least another inch out if not on the other side of the switch. Assuming that the trim (2 inches wide) is to be installed 1/4 inch from the door, I will have to nail it through the metal into the stud beneath it.

[billy_oliver880]

The door's been installed, and the 2x4 in the opening is covered by the metal door frame 1 3/4 inches. There is a light switch near the door which tells me that there is another stud but it's at least another inch out if not on the other side of the switch. Assuming that the trim (2 inches wide) is to be installed 1/4 inch from the door, I will have to nail it through the metal into the stud beneath it.

Drill holes through your steel frame and nail through to the stud...doors will have 2 2x4 on either side of the steel frame. Each 2x4 is actually 1 1/2 inchs wide so you are going to have 3 inches of nailing space around the door. Assuming you are going a 1/4 from flush with the inside of the frame you should be just fine. Confused yet...cause I am.

[MJZiggy]

Thanks. I actually understood that quite clearly. We must be confused the same way.

[woodbuck27]

Thanks. I actually understood that quite clearly. We must be confused the same way.

Sorry Ziggy put I got caught up in a post and my Puter is really erratic and it took awhile. Too long ! Looks like your set anyway.

Ed.

[MJZiggy]

Thanks, Buck.

[Deputy Nutz]

The screws and the pilot hole sound like good advice, or you could by some extra strong durable calk/glue and glue the trim on. They make some stuff and sell it at Menards or Home Depot.

[MJZiggy]

Thanks, Nutz (though out here it's Lowes) Nice to know Menards is still hanging on. Are you talking like Liquid Nails? Should I use regular or the mirror formula that someone neglected to use when they applied a full-length mirror to my hollow bathroom door?

How thick is standard drywall, I don't remember.

[imscott72]

I thought you were married?

[MJZiggy]

He's not so handy. He does electric and spackling. Otherwise it's me. Except if it requires a circular saw. I can handle the miter saw, but the circular is too heavy.

[billy_oliver880]

Standard drywall is 1/2 thick.

[MJZiggy]

Thank you. Now I know where to put in the last countertop support.

[billy_oliver880]

Did you get to put your trim on? Hope everything works out well.